How To Measure Motorcycle Helmet

The importance of wearing a motorcycle helmet is just as great as the importance of wearing a seat belt when driving a car. Wearing the right helmet is essential when riding a motorcycle since the helmet must fit your head correctly. Motorcycle helmets and other safety measures maximize safety if you are involved in an accident. But simply wearing a helmet does not guarantee overall safety. We guide you on How To Measure Motorcycle Helmet correctly in detail.

How To Measure Motorcycle Helmet

No matter if helmets are required in your state or not. The statistics and common sense indicate that motorcycle riders should always wear them. In 2004, the National Safety Council reported that the NHTSA estimates motorcycle helmets have saved more than 25,000 lives since 2002. In 2017, 1,872 lives were saved since motorcycle helmets were worn. There could have been another 82 lives saved in 2017.”

The National Highway Traffic Safety Administration and the National Safety Council found that, over the course of 16 years, wearing a motorcycle helmet saved 25,567 lives. Properly fitting helmets improve comfort and safety.

If you are riding a motorcycle, you should have a helmet suitable for your size in the event of an accident. Here’s a guide to help you determine the correct size, head shape, and fit of a motorcycle helmet so you can buy the proper helmet.

How To Motorcycle Helmet Correctly

As part of our demonstration on measuring for optimal helmet size, Shoji Helmets North America invited their marketing coordinator to our office. The dealer will also allow you to try on different sizes after you measure it. You should consult a motorcycle helmet dealer to make sure your helmet size is right for you after reading this article.

Moreover, dealers who provide you with a comfy will assist you to train the secure fit. During the presentation, Shoei’s marketing coordinator demonstrated how to properly measure helmets. Write down the measurement you get without using a flexible measuring tape, then refer to the brand’s size chart to pick the right one. So to know how to measure motorcycle helmets correctly, read the complete provided information.

The quickest way to measure your head circumference is by wrapping a flexible measuring tape around the largest part of your head. It must be about an inch above your eyebrows. Take note of the measurements (also note inches as well as centimeters). Jeffrey Allen

The shirts are available in sizes ranging from XS to XXXL. Sizes can be even bigger sometimes. To determine the proper helmet size, reference the appropriate size chart. Size charts for Shoes include centimeters as well as inches. It depends on the helmet manufacturer whether the measurement units are in inches or centimeters.

There are cheek pads varying in thickness from 31 millimeters to 39 millimeters available from Shoei. A helmet manufacturer will usually offer you cheek pads in various thicknesses in order to make this possible. Pad options ensure that your helmet fits perfectly no matter what kind of face and head shape you have.

How To Size A Motorcycle Helmet For Your Head Shape

If you need to find a helmet that fits you properly, then you should visit a retailer to try on a variety of helmets. The shape of the head determines how many helmets a manufacturer, including Arai, sees fit to make, such as Round Oval, Intermediate Oval, and Long Oval. It is really in the helmet’s fit that determines the head shape.

The medium Quantum-X (Round Oval) may be too loose, whereas the small Signet-X (Long Oval) may just be snug enough. Arai helps to determine whether the helmet is tight or loose based on your head shape, so it is important to compare.

A helmet that is smaller than its measured size may be possible for you if you determine your head shape. You need to take your head size into account. The first step in this process is to measure the size. The final answer comes from testing fit.”

How Tight Should A Motorcycle Helmet Be?

A straight line descends onto the broadest part of the head. Moreover, it prevents you from going straight from your cheekbones, ears, and temples. It will snug the properly fitted helmet when you pull the straps out, even if it has a few millimeters of giving at the time.

A helmet is worn by pulling the straps back and pulling the helmet on by ripping out the chin-guard part of the straps, placing your head into the helmet, moving the back of your head up the back of the helmet, rotating the chin down until fully donned. Don’t pull the straps straight out of the helmet.

In short, you will get authentic information related to how to measure motorcycle helmets. If there are pressure points, note how uncomfortable the helmet is to wear. It is advisable to try a different size or shape if your helmet appears worn out. Besides this, red marks also appear on exposed areas of my skin after experiencing pressure on my forehead. While wearing a small helmet I experience discomfort/pressure on my forehead.

If you push the helmet horizontally, it should not easily shift from side to side when we push it horizontally. But it should not easily rotate forward if you push it up from the back. From the back, do not rotate the helmet forward as you raise it. A helmet that fits like this is too big. Jeff Allen

The eyebrow should not be higher than your forehead and shouldn’t press up against your cheeks when worn. The marketing coordinator of Shoei emphasized that your eyes should center in the visual field so that the helmet will fit correctly. Too large a helmet is when it rests near or touches the eyebrows.

There was just a slight loosening along the chin, and the S was just too tight near the forehead. It was the M (bottom) that fit just right, according to the Goldilocks story. The size XS (top) was uncomfortable to wear, I got a big forehead, and my cheeks rose. In this area of my forehead, I didn’t feel any discomfort. The center of the viewport was where my eyes were.

Examples of how to determine how tight to fit a helmet are to fit the brow line. So that your fingers cannot fit between your head and the liner.

What Are DOT And ECE? Motorcycle Helmet Safety Standards

A DOT certificate and a Snell certificate are two other common certifications that can see on helmets. Additional, ECE  and JIS, as well as others tailored to other countries’ needs, are also available.

You will find detailed information about MIPS here. A multidirectional impact protection system has a low-friction layer between the liners that allow 10–15mm of displacement without sacrificing vehicle occupant safety.

Riding with the head sliding Impacts are unaffected by impact direction, thereby reducing the possibility of injury.

Motorcyclists are preparing for the worst with MIPS helmet protection

In order to find one that provides the greatest amount of protection and fits your budget, it is vital to measure it correctly. Consider the helmet shape, identify pressure points, and adjust the size and padding of the helmet appropriately. Additionally, remember to keep the inside pads and outside shell of your helmet clean by avoiding exposure to oils and dirt.

Final Thought

Our team comprehensively described the most confusing question of how to measure motorcycle helmets to get the appropriate size. Read the complete information attentively to upgrade your knowledge related to a motorcycle helmet and purchase the best one.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *