How To Reset Service StabiliTrak Light
The Service StabiliTrak Light is an amber warning light on the instrument panel. Illuminates when the StabiliTrak control module has failed. If the service StabiliTrak light comes on, you need to know how to reset service StabiliTrak light. You can do this by disconnecting the battery or by forcing a reset. This is a short tutorial.

However, you should perform the necessary diagnostic checks before resetting the Service StabiliTrak light. That’s because your system only communicates problems with warning lights.
The service StabiliTrak light warns drivers when their cars need to have their electronic safety systems reset. This helps drivers avoid dangerous situations and keeps cars safe to drive. After driving for a while, many consumers find that their cars feel more stable after having performed this procedure.
The method for disabling the StabiliTrak service varies depending on the car and model, this article will attempt to cover the majority of vehicles.
What is the Service StabiliTrak light and how does it function?
StabiliTrak lends a hand to vehicles of all speeds. It monitors wheel speed and a computer for automatic application of brakes through its wheels. This process mimics the effect of electronic stability control systems on vehicles with this feature. It also works at lightning speed and is more effective than vehicles’ built-in systems.
StabiliTrak uses sensors to determine the position of wheels and tires and track its direction. This data is compared to the car’s current direction to calculate its movement.
StabiliTrak facilitates steering by correcting course when operating on a slippery road. In brief, it’s a system for maneuvering.
In order to maintain traction through the initial phases of acceleration, this technique harnesses the torque of all wheels still attached to the road. During these crucial initial moments, all available power from the engine is transferred to tires with traction.

It’s recommended to turn off traction and stability control when your car gets stuck, such as when driving in a snowstorm or on a muddy slope. This also applies if your car is about to get stuck.
Where can I find the StabiliTrak system button?
The central console has the StabiliTrak button. StabiliTrak system may not be fitted in any vehicle that lacks a controller.
Message about StabiliTrak system service initiation
A Service StabiliTrak system warning indicator light should be illuminated if the system is functioning properly. When this light turns on during vehicle startup, this indicates that the Service StabiliTrak system was last maintained by a professional.
When a dash light turns on, try to determine if the information comes on while the vehicle accelerates or brakes. If it turns on during braking, this could suggest air brakes are stuck and in need of maintenance.
Your dealer should check the StabiliTrak system when a message appears while the car is slowing down. This can happen during braking, deceleration or both. Make sure to visit a secure area so that your vehicle’s brake system can be checked. If necessary, contact your car manufacturer for assistance.
What may cause the Stabilitrak indicator to illuminate?
When you see the Service StabiliTrak warning light, your vehicle’s system may not be functioning properly. If your traction service indicator is also illuminated, your service StabiliTrak system may be malfunctioning. Here are some frequent issues to be aware of:
1. Unsteady steering
You can determine if the StabiliTrak system is functioning properly by observing any deviations in the wheel’s movement caused by pressing the gas pedal or turning the steering wheel. This can be checked via a malfunctioning control unit if the wheel doesn’t follow any specific movement.
2. Input Sensor
The service StabiliTrak warning appears on the dashboard when there’s a problem with the input sensor. This may cause issues with the traction control system (TCS), but they may also be related to input sensors related to wheel speed, steering angle, or speed.
3. Controller Failure
The Service StabiliTrak system can be triggered by a malfunctioning Powertrain Control Module (PCM). StabiliTrak monitors the stability control and handling of the vehicle via electronic sensors on each wheel. This is especially important when driving in adverse weather conditions.
4. Service StabiliTrak connection issue
General Motors frequently employs wire harnesses that connect the transmission to the GM-LAN communication line. Called a GM-LAN cable, this wire harness is encased in a protective sleeve that covers the entire cable.
When damage to this line occurs, communication between the Service StabiliTrak and General Motors can be lost. A heat shield is placed over the gearbox to protect its wiring and essential components.
When connected to the heat shield, the GM-LAN cable can melt, exposing the metallic wires. This can interfere with communication between the vehicle’s computer systems and StabiliTrak. Additionally, service StabiliTrak system can fail to illuminate when connected to the heat shield.
Summary
Some people have confirmed that the StabiliTrak light keeps illuminating even when they use E85 fuel. Consumers are encouraged to regularly check their gasoline display signs.
Occasionally, a defective gasoline pump can cause the StabiliTrak light on your car to illuminate. However, this is not usually the case. As a result, check the StabiliTrak light when it lights up and investigate all of the above-mentioned causes.
How to Turn Off Stabilitrak in Different Cars
One of the most often asked topics among automobile owners ask is how to turn off StabiliTrak. We’ll teach you how to turn off your car’s traction control system.

1. Toyota
Toyota provides the simplest method for disabling traction control.
- For a few seconds, press and hold the button.
- Hold the button down until “engine check” shows on the display.
- Hold down the “Set/Reset” button until the message “stability control off” shows on the screen.
- When the operation is finished, you will notice the messages VSC OFF and TRAC OFF.
2. Volkswagen
The approach may alter significantly for people who drive a Volkswagen or comparable car.
The procedure for removing the traction control light is outlined below
- Put the car into auxiliary mode at this point. Remember to keep the engine running. The engine, however, should not be started yet.
- After that, proceed through the lights until you reach the warning lights.
- If you’re unsure which light is the signal light, look for the one with a triangle on the button. Click the button.
- When you hit the button, the signal lights will glow, and you will be ready to go to the next step.
- Now push the throttle and brake pedals. Begin carefully by pressing the accelerator pedal 5 times.
- When you press the accelerator pedal, the automobile will begin to move ahead. It will travel a few meters before engaging the car again. This will be done automatically by the car.
3. Ford
Find the StabiliTrak sensor for your specific vehicle model to determine this process’s applicability to your vehicle.
- When disabling the Stabilitrak system, first press the steering wheel traction control button and then instantly release it.
- Press and hold the control button for a short time to deactivate the traction control system (TCS).
On other models, you must locate the location of the StabiliTrak sensor
- Аinding the location of StabiliTrak sensors on cars is the first step. Additionally, the dashboard should be checked for a menu that controls the steering wheel.
- Press the black arrow-shaped button to the left of the steering wheel to unlock the car.
- Click the gear icon below the text to access additional menu options. Select Accept in order to view more options.
- From the menu screen, choose Select Driver Assist and press OK.
- Just press the OK button to confirm your choice, and that’s it. The Driver Control option has been selected, which means StabiliTrak has been disabled.
4. Chevrolet
Service StabiliTrak chevy and Traction control can be engaged in as follows:
- Press the center button and wait for the main board button to appear.
- For a few seconds, press and hold the button on the main board until the traction control is engaged.
- All you have to do now is wait for the StabiliTrak system in your car to activate.
- This will occur if your car hits 55 km/h or above, and you should be aware that the traction control will be disengaged as well.
How To Reset Service Stabilitrak Warning Light
Don’t be concerned if the service StabiliTrak light illuminates. It illuminates when there is a problem with the StabiliTrak control module. When the diagnostic test is finished, use this procedure to reset the StabiliTrak warning light.

1. Finding a suitable place or a curb
When you notice the StabiliTrak warning light on your car, the first thing you should do is find an appropriate location and pull over to the side of the road.
2. Turn off the car
Turn the flywheel of the automobile clockwise to see whether it turns off.
3. Start the engine
Wait 20 seconds for the service StabiliTrak to reset. After the specified time, start the car. The warning light should then go out. Contact a skilled technician if you need assistance executing a forced reset on your car.
StabiliTrak and traction control system are independently disengaged
Your traction control system (TCS), which prevents wheels from locking, is malfunctioning. Additionally, your engine ligh intermittently flickers and the service Stabilitrak computer has shut down. If you don’t remedy this issue quickly, you’ll see flashing service lights indicating the malfunction of the traction control and Stabilitrak systems as well. A quick fix awaits discovery, so don’t lose hope.
The dashboard light indicates that the engine fails to function properly. The service traction control and StabiliTrak motors require engine speeds to remain consistent. Automatic restart occurs when the engine suffers a malfunction.
If the engine lights up, why would malfunctioning engines force the Stabilitrak system and traction control systems to shut down? Both systems require consistent engine speed to operate correctly.
The car’s creator GM, created it with the intention of disabling certain features in the event of a missfire. This is due to safety concerns, and both issues are solved by removing the misfire itself.
A misfire in the engine’s ignition can be caused by a faulty spark plug wire. In this case, you can access the engine under the hood to figure out the source of the problem. However, a specialized mechanic should diagnose this issue if you aren’t able to.
Once you’ve determined that a computer program can’t solve the problem, you should use a code reader to obtain a numerical code.
Does StabiliTrak cause the vehicles to stall?
If the stability control system encounters a problem while moving at speed, StabiliTrak can cause the vehicle to stop in its tracks.
This is because the system is unable to repair the problem, leaving the vehicle without enough force to overcome the problem. If this occurs, the engine can shut down and the vehicle can stall.
Asked Questions
What would cause the StabiliTrak light to come on?
There are several issues that cause the service StabiliTrak indicator to light up, including covering all four systems including the braking system, traction system and steering wheel.
Be sure to get a professional’s help when diagnosing issues with the traction control system. Some of the warning lights on the dashboard may indicate a problem with steering angle or speed sensors, or defective wheel’s speed or steering wheel position sensor.
If you need to reconfigure the traction control system, that would be because the sensors aren’t configured properly.
How do you reset the service StabiliTrak light on an insignia?
Follow the procedures below to reset the StabiliTrak light.
- To reset the car’s central computer, disconnect the battery’s positive cable. Press the brake to drain the car’s electrical system. This should fix any issues with the car’s systems If there’s no problem with the electrical system, reconnect the cord to reset the service StabiliTrak warning.
- If the anti lock brake system light comes on after a reset, you need to replace the sensor. Remove the sensor from the wheel hub by unscrewing and unplugging it. In order to reset the computer, you need to replace the sensor after that.
- There could still be a problem with the headlights that requires checking out with an ODB code reader. If you don’t have one, you should take your car to a mechanic to get the issue checked and fixed.
Can you drive with service StabiliTrak light on?
Turning off the indicator light for the traction control system can make the vehicle dizzy and uncontrollable. In addition, turning it on can cause a crash if it makes the vehicle spin out of control.
StabiliTrak detects sudden loss of control and makes gentle corrections to maintain control of the vehicle. This prevents drivers from veering off course as they regain composure. As StabiliTrak senses this, it utilizes braking, throttle management and steered wheels to stay on track.
Further roadblocks should appear without your notice. You can proceed to your destination or home without issue. If the indicator light illuminates for any other reason, switch it off before driving.
How much does it cost to fix service StabiliTrak?
Prices for repairing and replacing vehicle StabiliTrak parts range from $90 to $200. Labor replacement costs or fees can vary from $25 to $40 depending on the manufacturer. This can also apply to the price of the work—about $25 to $40 per part.
As a result, if a mechanic discovers a fault with the StabiliTrak system, he will most likely replace it. The item is not very expensive, and the technician will most likely replace it for between $400 and $500.
Before deciding on a course of action, it’s necessary to investigate possible causes through the use of service StabiliTrak. This data will be necessary in case none of the suggested solutions work. If none can be found, then it’s recommended to have the car serviced by a nearby mechanic.
Final Thoughts
Standard service StabiliTrak technology alerts the driver to potential service needs by displaying notifications. This helps to avoid accidents and keep the car’s wheels from slipping on slippery roads. Defective input sensing mechanisms cause the StabiliTrak service light to reset.
Because of input sensors malfunctioning or being damaged, the wheels stop receiving power and lose traction. This is why StabiliTrak system maintenance alerts so often— they’re caused by a problem that anyone can repair.
Follow the link to read on StabiliTrak Light additionaly https://carsplan.com/reset-service-stabilitrak-light/
By knowing how to disable StabiliTrak, you don’t need to touch anything else just keep in mind to be careful as you do it.
Read abot other lighted signs on the pannel How to Fix Reduced Engine Power: Meaning, Causes and Solutions